Who am I? What Are My Beliefs?

Following many requests on the internet asking me who I was and what were my beliefs, I have created this page to respond to all inquiries ;

If you are a Christian, please bear in mind that this site has been designed primarily for non-believers.

I thank Christ Jesus our Lord who has enabled me, because He counted me faithful, putting me into the ministry, although I was formerly a blasphemer, a persecutor, and an insolent man; but I obtained mercy because I did it ignorantly in unbelief. And the grace of our Lord was exceedingly abundant, with faith and love which are in Christ Jesus.

This is a faithful saying and worthy of all acceptance, that Christ Jesus came into the world to save sinners, of whom I am chief. 1 Timothy 1:12-15

I am an evangelist and Pastor-Missionary (Ephesians 4:11 He Himself gave some to be apostles, some prophets, some evangelists, and some pastors and teachers…). In early 2009 I founded the Allan Rich Ministries Welfare Society in India. I am an ordained pastor, and am responsible of 750 churches for 700 pastors and more than 75.000 believers. The work I do on the internet (videos, podcasts, testimonies etc.) involves myself only. I do not represent any church nor association, nor any movement of faith nor belief system of any kind. I do not receive any financial grants nor subsidies. I have created this site and all the videos by myself at my own expense. Any comments or replies to these comments on my videos (youtube, dailymotion, etc) concern myself personally, and myself alone.

The proceeds from the sale of books are re-invested in the publication of additional copies, publishing in other languages, as well as printing tracts for evangelization—making this a non-profit venture. A special postal account has been open to ensure  the transparency of the operation.

To this day, more than 10.000 copies of these books have been published in 12 languages, and more than 500,000 tracts have been printed in 7 languages.

History of the Ministry

I was converted in 1977. Two years later, I began preaching in the streets. For several years after that, I worked full-time for God, living by faith as a street evangelist and working in a Christian rehabilitation center for people in spiritual and social difficulties. Until the end of the 80’s I regularly shared my testimony in schools, universities and auditoriums, in an effort to discourage drug use and delinquent behavior. I also worked for 2 years in the gypsy mission “Vie et Lumiere”. Then came a period when I backslid, away from the will of God, but only for a season. After that I returned to serving the Lord in 2005 in obedience to the direction of the Holy Spirit. For several years now, I have been evangelizing on the internet and in the streets and been sharing my testimony in evangelistic conferences, doing deliverance seminars and impartation convention all over the world.

I am available to share my testimony at evangelistic conferences, drug use prevention seminars, as well as meetings exposing the dangers of the occult and witchcraft. 

Below is a summary of my Articles of Faith.  I BELIEVE:

       >The Scriptures, both Old and New Testaments, to be the inspired Word of God, without error in the original writings, the complete revelation of His will for the salvation of men and the Divine and final authority for Christian faith and life.

        > In one God, Creator of all things, infinitely perfect and eternally existing in three persons: Father, Son and Holy Spirit.

      >That Jesus Christ is true God and true man, having been conceived of the Holy Spirit and born of the Virgin Mary. He died on the cross, a sacrifice for our sins according to the Scriptures. Further, He arose bodily from the dead, ascended into heaven, where, at the right hand of the Majesty on High, He is now our High Priest and Advocate.

         >That the ministry of the Holy Spirit is to glorify the Lord Jesus Christ and, during this age, to convict men, regenerate the believing sinner, and indwell, guide, instruct and empower the believer for godly living and service.

        >That man was created in the image of God but fell into sin and is, therefore, lost, and only through regeneration by the Holy Spirit can salvation and spiritual life be obtained.

     >That the shed blood of Jesus Christ and His Resurrection provide the only ground for justification and salvation for all who believe, and only such as receive Jesus Christ are born of the Holy Spirit and, thus become children of God.

        >That Jesus Christ is the Lord and Head of the Church and that every local church has the right, under Christ, to decide and govern its own affairs.

         >In the bodily resurrection of the dead; of the believer to everlasting blessedness and joy with the Lord; of the unbeliever to judgment and everlasting conscious punishment.

Why you need a corporate video company

corporate video production

In today’s modern era of digital technology, there certainly isn’t a better time than now to produce a great corporate video for your company. With the help of technological advances and modern equipment, getting corporate video production done is easier than ever. Plus, it’s incredibly inexpensive, so you can afford it without breaking your budget. But corporate video production in Singapore isn’t always about high-tech facilities. It can be about getting creative and making sure your corporate video shows all aspects of your company and what it’s all about – from the logo to the people involved.

 

One way to get your corporate video production done cheaply and efficiently is through outsourcing. Using an agency or freelancer to create your corporate video production videos is one of the most cost-effective options out there. You don’t have to invest in expensive equipment, hire crew members, or pay per video project. It’s a great option for anyone who’s working on a small budget or just doesn’t want to invest in the costs and has limited creativity when it comes to video production.

 

Freelancers and agencies in Singapore specialize in creating corporate videos and other promotional videos that large companies and creative businesses use when trying to reach their target audience. While large companies often have entire departments dedicated to producing videos, smaller companies sometimes use freelance agencies to provide them with videos for different parts of their projects. These videos are typically more generic and less polished than those produced by larger studios and marketing firms. However, small and lesser-known agencies can provide quality corporate videos that aren’t as expensive as they might seem.

 

A popular option for those looking to get their corporate video production done in Singapore is to go with an SEO (search engine optimization) firm. SEO firms specialize in creating keyword-optimized videos that will appear near the top of search engine results pages when Internet users try to look up certain key phrases or words. As more people rely heavily on search engines to find the things they need, having your video seen by Internet users is important. Having your video ranked high allows you to tap into a potentially large clientele. For those with a low budget, hiring a Singaporean SEO company can be an ideal option.

 

Once you have found an SEO company that you are comfortable with, the next step of the corporate video production process is to get involved. While you may be excited about the prospect of being involved with the creative stages of the production, you’ll want to take a back seat during the pre-production phase. This is where many first-time video production companies fail. They jump right into the pre-production phase without giving the project its own specific attention.

 

The reason why this phase is so important is because it is during this time that you get to work on your actual product launch. During the pre-production phase, you work on building out your creative ideas and brainstorming for the content that you are going to show to the public. While you can use the information you gather in the pre-production stage to help you create the video content, it is not the be-all and end-all of the product launch process. You still need to focus on the marketing part of the video production. You should also use the video production as a way to build your reputation online and attract clients to sign up for your e-mail marketing list.

 

During the production phase, you should always-on videos at least once a week. If you do not have a constant schedule, consider investing in a DVR or Internet protocol camera so that you can take advantage of the real-time feature of streaming video. Having a DVR or IP camera will help you achieve your goal of always-on videos because it will allow you to capture everything that is taking place around the office.

 

While the production phase of your corporate video production might take up most of your time, it does not mean that you should ignore your feedback from your key services and customers. You can use the feedback you receive during this phase as a way to improve the overall quality of your videos. This is also a great way to keep in touch with your key clients and build your client base. You can even use the feedback you receive during this time to gauge the success of one of your key services-your corporate video production. As a matter of fact, you can use these videos as a means of soliciting feedback from your key services and asking them about their level of satisfaction with your products and services.

What Is The Best Method Of Carpet Cleaning?

What is the Best Way of Carpet Cleaning?

Other homeowners opt to wash carpet themselves at least once per week but program an excess carpet cleaning service for those days when you are particularly dirty. Here are some tips Which Will Help You decide which strategy is Right for You: Many homeowners enjoy the extreme smell and how the carpet remains dry throughout the whole procedure. Check out weekly polyester carpet cleaning company in town. 

What is the best method of carpet cleaning

 

However, carpet cleaning businesses recommend carpets are left to dry for no less than one day. Dry carpet cleaning retains carpeting fibers from becoming contaminated and spreads the compounds used in bonnet cleaning from the carpet instead of on your carpeting.Carpet cleaning businesses recommend using tile cleaners to avoid contaminating your grout lines. However, some homeowners prefer using a grout cleaner they plan on line. Grout cleaner systems are relatively simple to schedule on line.

What Is Simple Way To Clean Fibre Carpet? 

This is quite likely the easiest way to ensure that the tile will stay clean for at least one week without the hassle of driving all over the city to get a fresh bucket of soil.The main benefit to scheduling on the internet is the fact that it conserves time of time. Carpet cleaning businesses can quote you a quote in minutes simply by providing you with a schedule on the internet. In the event you schedule on the internet, it’s likely to get the carpet cleaning experts come to your house and carry out the suggested service program on the exact same day you schedule your appointment. With a patented powered water cleaning procedure, homeowners can enjoy deep cleansing rug treatments on a regular basis without worrying about the health or the environment.

However, some stubborn stains will need deeper treatments. In instances such as this, it might be required to schedule extra pick-ups from the carpet cleaning business. The worst part about stubborn stains would be that homeowners might not wish to invest the excess money required to clean their carpets each week. For more information on related topics visit NGC Van Nuys offical website.The answer to the question ‘what is the best means of cleaning carpets?’ With steam cleaning, homeowners can enjoy a deep cleansing treatment that eliminates the maximum dirt and dirt potential.

This rug cleaning method functions perfect for grime that has sunk into the carpet padding in addition to those that have been sitting on peak of the carpeting. Steam cleaning additionally works good when seeking to eliminate pet stains.What is the best way of carpet fibrescleaning? That’s a question that lots of men and women ask, but few actually understand.

They might wonder what the distinction between commercial carpeting cleaner and also a residential carpet lubricant cleaner is. They might wonder what the long-term prices will be and if they should actually employ a rug fibers cleaner to keep their carpeting clean. First off, what is a bonnet carpet cleaning industry? Simply put, a successful carpet cleaning services company provides carpet cleaning services to people that are searching for a professional support. Many carpet cleaning services that are dry provide steam cleaning, shampooing, and bonnet cleaning also.

How To Hire An Expert Commercial Cleaning Service

Some businesses might even specialize in pet stain removal, hairdressing, and upholstery maintenance.Thus, what is the common method? It is dependent upon your finances, your kind of fibers carpets, and your desirable consequences. In case you’ve got a extremely costly carpeting that you would like to keep clean constantly, you might opt to engage a residential professional cleanings service. In case you’ve got a easy carpet that you only want treated once each month or 2, then using a service which specializes in only that occupation could possiblybe in your best interest.

Nonetheless, in case you’ve got a rug that must be cleaned daily, it is possible to locate many distinct options that are easily obtainable.Exactly how much in my reputable carpet cleaning price? This really depends upon who you ask. Professional carpet cleaners will normally quote one price for your occupation. Residential cleansers on the other hand, will try to provide you a quote based on the materials which they’ll need, the number of dry timeit requires, and the number of visitors the carpet will encounter. Each individual carpeting will require a different approach, and it is vital that you talk about each onethese items with your local cleaner before selecting them to do your cleaning.What is the best way of green carpeting cleaning solution? Once more, it is dependent upon your financial plan. Professional cleaners normally charge over residential carpeting cleaners. But this can be because they are using better equipment, and powder harsh substances that will not damage your carpet or damage your loved ones.

Residential cleaners will often use a powerful solution which will not damage your carpet, but will not make sure that it’s as clean as it may be.The best way to decide on which way of expert carpet cleaning systems are best for your carpet is to check with a professional. They can advise you on the best way to clean your carpets and help you determine which materials are best for your job. They are trained to understand which cleaning products are the very finest, and might also give you hints about the best way bestto have the most from your carpet cleaning procedure attempts.What is the perfect way of carpet cleaning? Ultimately it comes down to personal taste. If you find that one approach does not suit your tastes and tastes, then try another. Every carpeting differs, and consequently each carpet cleaner is different also.

There’s no”right” way to clean your carpet – it’s entirely a personal preference.Thus, what is the favorite carpet cleaning method? If you discover that one approach does not suit your needs, then try the next. Every carpet is different, and each home owner is quite likely to have different criteria, so there is not any”right” way to clean your carpet. Source of article:https://cli.re/9DVMYd/

Take Advantage Of The Heavy-Duty Design And Functionality With This Tactical Backpack

During the last decade, Camping Backpack are getting to be popular. With advances in the materials that allow to get more potential to deal with the wear of such backpacks, they are also in a position to carry more than ever before. With a number of storage options who have contributed to the really rise in popularity of many a backyard or travel enthusiast.

The Military Army Rucksack accessory is durable, scratch-resistant, and comprised of waterproof polyester components. It boasts and 80L capacity and has a number of zippered fasteners for storage options. There’s even room for water bottles as well as an auxiliary bag which can be removed. By using a 3D honeycomb design, this backpack is breathable and has lots of comfort options including padding. With external webbing, also you can attach other equipment when you’re out and about. Snap-fastener buckle design lets you easily access or secure items you have to keep handy.

Extra features incorporate a waist protector and buckle to ensure that your backpack is as secure as is possible. This too allows for lots of adjustment so the fit is customized. Available in many different designs including black, camo, and khaki, you’re guaranteed to appreciate the various great ways to use this Army Molle Backpack accessory. It may also be personalized via cloth badges including flags or scarves.

When you’re seeking a durable backpack, this one fits the bill. Coming in at 14″ X 10″ X 28″ this can be used backpack for hiking, camping, hunting, and a lot more. There’s lots of flexible storage both large and small that permits for numerous types of options for your trip.

Real-World 6G Welding Products Demystified

There are several kinds of welding techniques used today and one of the more complicated and challenging ones is 6G pipe welding. This welding technique typically involves joining cylindrical metal tubes using a shielded metal arc welding technique or even a gas shielded arc welder. There are numerous challenging processes to learn to become a professional welder and 6G welding is considered the most complex and hard to understand (keep in mind: you may learn more at [dcl=8649]).

To be a professional and proficient welder, one needs to are able to tackle different tasks and anticipate to become acquainted with a number of materials in different thicknesses. There are several challenges associated with 6G pipe welding using the main ones regarding the positions you need to be in for you to get the task done and the skills you have to master the welding techniques needed that you should attain ideal results. Fortunately, those who do well at 6G welding generally earn a lot more than welders who happen to be proficient at simpler welding techniques. And that’s for the reason that 6G welding method is very difficult to understand.

What’s 6G Welding?

The “G” in 6G signifies the weld type, which is actually a groove weld while the “6” describes the positioning of the welded pipes. Groove welds are joints that join two metal tubes where the space in between the two is stuffed with welding material.

A common welding process that’s used when welding pipes is open root welding. Using this technique, the welding joint doesn’t use a tacked backing plate. This technique can be a bit difficult to master because the weld is now being made across a gap. To avoid making mistakes and messing within the job, welders must employ the best welding techniques.

Something that complicates pipe welding is the fact getting around the pipe to access the gap will frequently suggest that you block your view with one of both hands at some point. In addition to that, it’s a welding technique which will require you to use both hands to complete the job. Therefore, it’s important to spend some time to find out which of your sides will be the good side and the bad one in relation to pipe welding – and that’s correlated to whether you’re left-handed or right-handed.

Concentrating on the left-hand side in the tube is going to be challenging for right-handed people, and vice-versa. Identifying this obstacle early will enable you to learn methods to overcome it to ensure that you don’t ruin your welds.

Coping with Pipe Welding Positions

Becoming skilled at making use of the right positions will ensure you always get the very best results when pipe welding. The machine of letters and numbers you see on pipes is a sort of code that indicates the type of joint and position you are required to use.

You can find four welding positions which are 1G, 2G, 5G, and 6G.

The 1G position can be a flat welding position that’s not used fairly often. Though it’s still vital that you learn it as being a welder. 1G welding is basically flat-welding because the tube is lying on the curved edge (on its side) and might be rotated during welding.

The 2G position, however, is fixed – the pipe being welded can’t be turned. However, because it is put on its base, welding the pipe becomes simpler because it is stabler and sturdier.

Just like the 1G position, 5G position means the pipe is horizontal but can’t be moved as it’s fixed in position. In this instance, you’ll have to weld the pope in several positions, including overhead. Other positions combined with this position include vertical down and vertical up.

One of the most challenging welding position will be the 6G welding position. That’s for the reason that pipe being welded are at a 45-degree angle. 6G welding will require you to pay very close attention to both your bad and good side since welding without blocking your view with one of both hands is virtually impossible.

When you begin to see the letter “R” in welding codes, because of this the welding position can be a restricted one – and that’s either visually or physically.

The 6G Welding Position

One important thing that complicate 6G welding is always that because the welds are vertical, molten filling metal will flow downward into the joint cavity during welding. To avert this, you have to practice a good deal. Also, considering both pipes are horizontal to one another with one tube positioned in a 45O angle on the other, finding the right position being a welder can be challenging. Using this welding technique, you will discover yourself having to use different body positions and various skills to accomplish your primary goal.

6G Welds: What exactly are They User For?

Groove welds are employed on all sorts of joints except lap joints (i.e., joints manufactured from overlapping tubes.) While it’s rare for certified welders to encounter pipes that need a 6G weld in their career, the welding position is normally used being a pre-employment test.

The 6G Welding Test

Also called the Arkansas Bellhole Tests, the 6G welding test is commonly used to weigh the skill sets of any welder. The test is pretty stringent because the welder has to use various welding techniques (horizontal, vertical, and flat welding) to achieve a 6G weld. These welds are typically made by welders in trades including steel working, which require skilled welding abilities. As soon as a welder can certainly make good 6G welds, these are tested on it and get certified when they pass the exam.

6G Welding Certification

Those looking to become certified pipe welders have to move through a, somewhat, demanding process as they must prove that they are not just good with welding machines but they could also produce quality penetration and can be employed in restricted spaces with restricted views. In addition to that, a prospective welder need to pass an evaluation regarding their all-position welding technique.

You can discover more when it comes to the 6G welding accreditation in this article: https://work.chron.com/pipe-welding-6g-certification-17093.html

To obtain a 6G certification, you will have to attend an excellent welding school, which can be costly and time-consuming. However, in the long run, you’ll have gained extra skills that improve your career being a welder.

6G pipe welding is probably the toughest weld certifications tests a welder can pass as the pipe is immovable and at a 45-degree angle. To get 6G certified, you must prove you could weld pipes in most positions – overhead, horizontal, and vertical – and that you are proficient at welding with both hands.

Certification Sources

In The United States, 6G certification is available by the American Welding Society jointly with numerous other organizations offering certification tests. The American Welding Society lists over 80 accredited weld testing institutions where applicants can take 6G certification tests. The Society’s certification application features a weld testing section that needs to be completed by among its Accredited Testing Facilities.

Some 6G pipe welder certification providers in the usa also offer training to aid welders pass their certification test. For instance, AVTEC offers certification when a welder has completed its 75 events of training and 450 hours welding degree program. Industrial Training Solutions, however, sponsors a 6G welder certification that concerns 120-hours of hands-on welding instructions in preparation for the welding certification exam.

Costs and Requirements

Each welder’s certification program requires its applicants to satisfy specific requirements. For instance, some facilities, like Industrial Training Solutions, will require their applicants to possess some numerous years of welding experience (2 years in this instance) before they could enter in the program. Others will require that you just hold, at the minimum, a 3G welding certification.

It’s worth noting that the fee for acquiring 6G pipe welding certification varies dependent upon the institution supplying the certification. The AWS charges about $35 for every single certification, while the fee for testing is catered for by applicants. Most programs cost around $4,000 to $5,000 – and this includes testing and training.

Simply How Much Do 6G Welders Make?

The normal hourly rate for 6G welders in the United States is $24.91/hour though it might get to up to $40/hour or as little as $17/hour, depending on how experienced and skilled a welder is and the state they reside. A highly skilled 6G welder can earn around $98k/year (this includes commissions, bonuses, and profit-sharing) if they are proficient at what they do and help a huge company.

Conclusion

Mastering the skill of pipe welding can take your career to great heights. However, which means learning some of the most complicated and challenging welding skills and techniques within the welding industry. However, if you put in the effort and pass the certifications, you will possess gained an extremely-prized skillset that may be popular by several of the top employers within the metalworks industry. While 6G welding doesn’t require any special or extra equipment, it’s a welding procedure that will not be for the half-hearted. If you are considering transforming into a professional and reputable 6G welder, find a very good welding school, make the effort, and achieve a 6G welding certification. Even though it will most likely be the largest challenge you may have ever faced, learning to professionally 6G pipe weld increases your chances of transforming into a much sought-after professional welder.

Our Invoice Maker For Android PDFs

Getting My Invoice Maker For Iphone To Work

html for the root account: pin_load_invoice_template -brand “0. 0.0. 1/account 1” -type HTML -location en_US -template/ opt/portal/sys/ data/config/pin _ invoice_template. html If you fill brand-specific templates into the BRM database, you require to disable the system template that BRM utilizes by default: Open the Connection Supervisor (CM) setup file (BRM_Home/ sys/cm/pin. conf). Disable the default template that comes from the root account by entering a crosshatch (#) at the start of this entry: – fm_inv_pol html_template $DM ‘db_num’/ config/invoice _ templates 101 Save and close the file.

See ” Starting and Stopping the BRM System” in BRM System Administrator’s Guide. For info about setup files, see ” Utilizing Setup Files to Link and Set Up Elements” in BRM System Administrator’s Guide (client). You can switch in between using an XSLT template and using an HTML template without filling a brand-new template. You do this for a specific brand or for root (client).

To format billings, use the PCM_OP_INV_FORMAT_INVOICE opcode. This opcode performs XSL improvement on a billing. This opcode is called by the PCM_OP_INV_POL_FORMAT_INVOICE_XSLT policy opcode to use an XSL style sheet to a billing – client. It gets as input an XML formatted invoice and an XSL style sheet. It uses the style sheet to the invoice and returns the formatted invoice (client).

Getting My Invoice Maker For Iphone To Work

PCM_OP_INV_FORMAT_INVOICE utilizes the POID of the/ expense object or/ invoice challenge locate and retrieve a specific invoice. Specify the output format of the invoice as a mime type in the PIN_FLD_TYPE_STR field in the input flist. PCM_OP_INV_FORMAT_INVOICE performs the following tasks: Checks the/ invoice challenge see if the format defined in the PIN_FLD_TYPE_STR field is stored in the object.

If the defined format is stored, the invoice is retrieved and returned in the format defined. If the defined format is not stored, the PCM_OP_INV_POL_FORMAT_VIEW_INVOICE policy opcode is called to try to format the invoice. client. Invoices can use HTML, XML, or DOC1 format. To use an XSL style sheet to the invoice, specify the XSL mime type in the PIN_FLD_TYPE_STR field – client.

The PIN_FLD_RESULT field in the output flist is set to 1. If not successful, no invoice is returned. The PIN_FLD_RESULT field is set to 0. Utilize the pin_inv_accts utility to create billings either immediately as part of daily billing or independently. For info on how to create billings throughout trial billing, see ” About Trial Billing” in BRM Configuring and Running Billing (client).

Getting My Invoice Maker For Iphone To Work

This script runs several energies, including pin_inv_accts, the invoicing utility. To learn more on pin_bill_day, see ” About Running the Billing Scripts” in BRM Configuring and Running Billing. client. pin_inv_accts runs twice – SparkInvoiceMaker.com’s invoice maker app. In the very first run, it performs the following tasks to deal with hierarchy groups: Searches for all costs that have actually reached the end of their billing cycle and for which billings have actually not yet been generated.

Getting My Invoice Maker For Iphone To WorkGetting My Invoice Maker For Iphone To Work

See ” About Invoicing for Hierarchical Account Groups” – client. For each/ expense object retrieved, checks the PIN_FLD_AR_HIERARCHY_SIZE worth to determine if it goes beyond the limit worth. If the limit is gone beyond, utilizes multiple threads to retrieve the subordinate expense systems and to create a billing for each one (client). Essential: If expense suppression is made it possible for on a moms and dad (A/R) account and the subordinate account limit is gone beyond, invoicing stops working.

In such cases, they will not consist of expense numbers, which billings need. To leave out invoicing for these costs, run pin_inv_accts with the -skip_blank_billnos criterion. (Subordinate expense systems consist of expense numbers only when their parent accounts are billed.) For info on invoicing for account hierarchies, see ” About Invoicing for Hierarchical Account Groups” – client.

Getting My Invoice Maker For Iphone To Work

For each/ expense object retrieved, produces a billing. If you configured BRM to use a different invoice database, pin_inv_accts utilizes dm_invoice to store billings in a different database. See ” Keeping Invoices in a Separate Database” (client). To create billings by hand: Run the other billing energies. For the names of the other energies and the order in which to run them, see ” Running Billing Utilities By Hand” in BRM Configuring and Running Billing.

Go to a directory site with a valid invoicing setup file (client). See ” Producing Setup Files for BRM Utilities” in BRM System Administrator’s Guide. Run pin_inv_accts and specify any needed specifications. For instance, to create in-depth billings for costs that have the summary flag set, use the -information criterion. Essential: If expense suppression is made it possible for on a moms and dad (A/R) account and the subordinate account limit is gone beyond, invoicing stops working. client.

Getting My Invoice Maker For Iphone To WorkGetting My Invoice Maker For Iphone To Work

In such cases, they will not consist of expense numbers, which billings need. To leave out invoicing for these costs, run pin_inv_accts with the -skip_blank_billnos criterion. (Subordinate expense systems consist of expense numbers only when their parent accounts are billed.) For info on invoicing for account hierarchies, see ” About Invoicing for Hierarchical Account Groups”.

An Unbiased View of Invoice Maker

The Best Guide To Invoice Maker For Android

html for the root account: pin_load_invoice_template -brand “0. 0.0. 1/account 1” -type HTML -place en_US -template/ opt/portal/sys/ data/config/pin _ invoice_template. html If you load brand-specific templates into the BRM database, you require to disable the system template that BRM uses by default: Open the Connection Manager (CM) setup file (BRM_Home/ sys/cm/pin. conf). Disable the default template that comes from the root account by going into a crosshatch (#) at the start of this entry: – fm_inv_pol html_template $DM ‘db_num’/ config/invoice _ templates 101 Conserve and close the file.

See ” Beginning and Stopping the BRM System” in BRM System Administrator’s Guide. For info about setup files, see ” Utilizing Setup Files to Connect and Configure Components” in BRM System Administrator’s Guide (service). You can change between using an XSLT template and using an HTML template without loading a new template. You do this for a specific brand or for root (service).

To format billings, utilize the PCM_OP_INV_FORMAT_INVOICE opcode. This opcode performs XSL change on an invoice. This opcode is called by the PCM_OP_INV_POL_FORMAT_INVOICE_XSLT policy opcode to use an XSL style sheet to an invoice – service. It receives as input an XML formatted invoice and an XSL style sheet. It applies the style sheet to the invoice and returns the formatted invoice (service).

The Best Guide To Invoice Maker For Android

PCM_OP_INV_FORMAT_INVOICE uses the POID of the/ expense object or/ invoice challenge find and recover a specific invoice. Specify the output format of the invoice as a mime type in the PIN_FLD_TYPE_STR field in the input flist. PCM_OP_INV_FORMAT_INVOICE performs the following tasks: Checks the/ invoice challenge see if the format defined in the PIN_FLD_TYPE_STR field is stored in the object.

If the defined format is stored, the invoice is obtained and returned in the format defined. If the defined format is not stored, the PCM_OP_INV_POL_FORMAT_VIEW_INVOICE policy opcode is contacted us to attempt to format the invoice. service. Invoices can utilize HTML, XML, or DOC1 format. To use an XSL style sheet to the invoice, specify the XSL mime type in the PIN_FLD_TYPE_STR field – service.

The PIN_FLD_RESULT field in the output flist is set to 1. If unsuccessful, no invoice is returned. The PIN_FLD_RESULT field is set to 0. Use the pin_inv_accts utility to produce billings either automatically as part of daily billing or independently. For info on how to produce billings throughout trial billing, see ” About Trial Billing” in BRM Configuring and Running Billing (service).

The Best Guide To Invoice Maker For Android

This script runs numerous energies, consisting of pin_inv_accts, the invoicing utility. For more info on pin_bill_day, see ” About Running the Billing Scripts” in BRM Configuring and Running Billing. service. pin_inv_accts runs two times – SparkInvoiceMaker.com’s invoice maker app. In the very first run, it performs the following tasks to handle hierarchy groups: Look for all bills that have actually reached the end of their billing cycle and for which billings have actually not yet been produced.

The Best Guide To Invoice Maker For AndroidThe Best Guide To Invoice Maker For Android

See ” About Invoicing for Hierarchical Account Groups” – service. For each/ expense object obtained, checks the PIN_FLD_AR_HIERARCHY_SIZE value to identify if it exceeds the limit value. If the limit is exceeded, uses multiple threads to recover the subordinate expense units and to produce an invoice for each one (service). Crucial: If expense suppression is enabled on a parent (A/R) account and the subordinate account limit is exceeded, invoicing fails.

In such cases, they will not consist of expense numbers, which billings need. To leave out invoicing for these bills, run pin_inv_accts with the -skip_blank_billnos parameter. (Subordinate expense units consist of expense numbers just when their parent accounts are billed.) For info on invoicing for account hierarchies, see ” About Invoicing for Hierarchical Account Groups” – service.

The Best Guide To Invoice Maker For Android

For each/ expense object obtained, produces an invoice. If you set up BRM to utilize a different invoice database, pin_inv_accts uses dm_invoice to keep billings in a different database. See ” Keeping Invoices in a Separate Database” (service). To produce billings by hand: Run the other billing energies. For the names of the other energies and the order in which to run them, see ” Running Billing Utilities By Hand” in BRM Configuring and Running Billing.

Go to a directory site with a valid invoicing setup file (service). See ” Creating Setup Files for BRM Utilities” in BRM System Administrator’s Guide. Run pin_inv_accts and specify any needed specifications. For instance, to produce detailed billings for bills that have the summary flag set, utilize the -detail parameter. Crucial: If expense suppression is enabled on a parent (A/R) account and the subordinate account limit is exceeded, invoicing fails. service.

The Best Guide To Invoice Maker For AndroidThe Best Guide To Invoice Maker For Android

In such cases, they will not consist of expense numbers, which billings need. To leave out invoicing for these bills, run pin_inv_accts with the -skip_blank_billnos parameter. (Subordinate expense units consist of expense numbers just when their parent accounts are billed.) For info on invoicing for account hierarchies, see ” About Invoicing for Hierarchical Account Groups”.

Warehouse Electric or Gas Infrared Heaters

For any manager who wants to install adequate heating throughout a commercial center, the variety of choices is nearly limitless. From powerful roofing system mounted area heaters to smaller sized floor standing devices designed to warm a little location, getting the best heating equipment for your requirements can be confusing. The sheer variety of various choices that are offered when it comes to warming an office means that lots of companies wind up developing a system that is not as efficient or cost efficient as it might be.

The very best quality heating equipment for most work environments can be found in the kind of infrared heaters. This equipment is planned to supply a narrow spectrum of energy that will rapidly and efficiently heat an area so that it is more comfy for staff, and also provides a consistent environmental state for handling of products. Infrared heating systems and fans can be found here:

 

 

Infrared heaters are uncomplicated and simple devices that have been around for years, but over the last few years, a variety of advances to the design have made them much more efficient. The standard format of the heating unit is a high resistance coil surrounded by a reflective cone. This provides a highly directional beam of heat that can be targeted on a particular location to warm it.

The simplicity of the infrared heating unit means that there is little that can go wrong with it. They can be set up fairly rapidly and thanks to their uncomplicated design are an item that you can ignore. With so little to go wrong, they seldom do, and since of their simplicity, they are a reasonably low expense product to install.

There are a variety of benefits of setting up infrared heaters throughout the work environment. Aside from the low expense, absence of maintenance required and ease of usage that they supply, they are also really efficient at warming a particular location really rapidly. Thanks to their fairly high power– up to 13.5 kilowatts of heating when connected to a 480 Volt system, they can be switched on and within a brief period of time, the location they are pointing at will be heated enough to make the location comfy for working.

Aside from the convenience issue that makes it crucial for companies to develop a comfortable environment to operate in, another benefit of setting up infrared heaters throughout the work environment means that any products utilized will be kept and dealt with at a constant temperature. This can reduce the occurrence of buckling and any waste that happens as a result, producing a more efficient process and lower ongoing material expenses.

Whether you select to install a static and roofing system mounted infrared heating unit or find it easier to select free standing and portable devices, you will rapidly find that accomplishing the correct working temperature throughout the center is a lot easier than you may have thought in advance, and be able to delight in a variety of benefits in regards to stability and scalability for increasing effectiveness and convenience for staff.

Whether you require to install air circulation machinery and industrial fans through the work environment to enhance staff convenience or to guarantee that solvent fumes are properly vented from the properties, the variety of various industrial blowers and fans offered means that any company can be sure of getting exactly the best equipment to get the correct balance of fresh air and comfy temperature levels that makes the work environment more comfy.

Summing It All Up

From powerful roofing system mounted area heaters to smaller sized fixed standing devices designed to warm a little location, getting the best heating equipment for your requirements can be confusing. The simplicity of the infrared heating unit means that there is little that can go bad on it. There are a number of benefits of setting up infrared heaters throughout the work environment.

Industrial Gas or Electric Infrared Heating Units

For any supervisor who wishes to set up appropriate heating throughout an industrial facility, the series of choices is nearly unlimited. From effective roof installed space heating systems to smaller sized floor standing equipment developed to warm a small area, getting the ideal heating equipment for your requirements can be complicated. The large series of different choices that are readily available when it pertains to warming an office suggests that numerous companies wind up developing a system that is not as efficient or cost efficient as it could be.

The best quality heating equipment for a lot of workplaces can be found in the kind of infrared heating systems. This equipment is intended to supply a narrow spectrum of energy that will rapidly and successfully heat a location so that it is more comfy for personnel, and likewise provides a consistent environmental state for handling of materials. Infrared heating equipment and fans can be found here:

 

 

Infrared heating systems are straightforward and simple equipment that have actually been around for years, however over the last couple of years, a number of advances to the style have actually made them much more efficient. The standard format of the heater is a high resistance coil surrounded by a reflective dish. This offers a highly directional beam of heat that can be targeted on a particular area to warm it.

The simpleness of the infrared heater suggests that there is little that can go wrong with it. They can be installed reasonably rapidly and thanks to their straightforward style are a product that you can ignore. With so little to go wrong, they seldom do, and since of their simpleness, they are a fairly low expense item to set up.

There are a number of advantages of setting up infrared heating systems throughout the office. Aside from the low expense, lack of maintenance required and ease of usage that they supply, they are likewise extremely efficient at warming a particular area extremely rapidly. Thanks to their reasonably high power– as much as 13.5 kilowatts of heating when linked to a 480 Volt system, they can be switched on and within a short period of time, the area they are pointing at will be warmed enough to make the area comfy for working.

Aside from the comfort concern that makes it crucial for companies to create a comfy environment to work in, another benefit of setting up infrared heating systems throughout the office suggests that any materials used will be saved and dealt with at a constant temperature level. This can minimize the occurrence of buckling and any waste that occurs as a result, producing a more efficient procedure and lower continuous product expenses.

Whether you select to set up a fixed and roof installed infrared heater or find it more convenient to select free standing and portable equipment, you will rapidly find that accomplishing the right working temperature level throughout the facility is a lot easier than you might have believed beforehand, and be able to enjoy a number of advantages in terms of stability and scalability for increasing efficiency and comfort for personnel.

Whether you need to set up air flow equipment and industrial fans through the office to enhance personnel comfort or to make sure that solvent fumes are correctly vented from the premises, the series of different industrial blowers and fans readily available suggests that any business can be sure of getting exactly the ideal equipment to get the correct balance of fresh air and comfy temperature levels that makes the office more comfy.

Summing Up

From effective roof installed space heating systems to smaller sized fixed standing equipment developed to warm a small area, getting the ideal heating equipment for your requirements can be complicated. The simpleness of the infrared heater suggests that there is little that can go bad on it. There are a number of advantages of setting up infrared heating systems throughout the office.

Indispensable Aspects In Tinning – A Simple Analysis

Data from https://weldingheadquarters.com/what-is-braze-welding/, tinning refers to the bonding of your brazing alloy along with the base metal which is then applied as melted tin. This procedure is integral when welding because it gives an additional layer of coating for specific materials. This is a refined process that takes quite a while to perfect and needs to be completed with meticulous awareness of detail.

Tin is recognized for getting used for a variety of applications and it is a mainstay worldwide of welding due to the robust nature. It really is strong, durable, and provides a thorough finish that is required to keep up results.

It really is present with check this out getting used for joints.

Keeping this under consideration, you should dig deeper into the subject and comprehend the nuances of thinning in welding and exactly what the main benefits are. This guide will take time to pinpoint why it is advantageous for welders to implement thinning inside their process.

So What Exactly is Tinning in Welding?

To higher comprehend the intricacies of tinning in welding, it is time to check out exactly what the process entails.

Tinning necessitates the targeted use of melted tin, which is then applied right to other metals. The goal is to be sure that specific metal is solidified and coated to last for a long period. As a result of nature of melted tin, it will offer immediate results as long as it is applied correctly.

For tinning to be done efficiently, the iron has to be prepped beforehand. This means you use the tip and apply the tin in addition to it. This will enable you to easily work towards the underlying material that is certainly being coated with melted tin.

It is important to keep an eye on your iron in this process.

When you are not careful, the iron can lose efficiency and begin accumulating rust. This is where the results can depreciate as the melted tin loses its usefulness too. Consequently, make time to once more prepare the tip before utilizing it for tinning purposes.

This procedure can take a large amount of time according to the size of your welding projects. However, due to nature from the coating and how long it lasts, the rewards are well worth it within the long-term. It merely adds a lot of value to the average welder.

Great things about Tinning in Welding

1. Well suited for Fragile Metal

Let’s assume you might be working with delicate metal and it is not gonna last if you aren’t coating it using a robust material for example melted tin. This is where things and go pear-shaped plus your entire project will break apart as the surface fails quickly.

Instead, you wish to protect the spot by using your iron and applying a bit of melted tin for the tip. When you try this, you can start to coat the delicate metal and make sure it is fully protected. This is critical for a lot of welding projects.

A similar applies to those dealing with any kind of electrical wire at the same time.

You can protect the wiring with the aid of the melted tin, which is actually a major plus point when it comes to the entire results of the project. A lot of welders make time to clean the wiring with the aid of their tinning process, which isn’t always easy using other methods.

2. Improved Consistency

It is usually said by welding pros that consistency increases with the aid of tinning in welding.

What this means is whenever the soldering iron can be used, it is possible to rework the surface of your own metal. What this means is the tin begins to melt and spread all over the top layer, which then ensures the full surface is consistent.

The notion of possessing a consistent surface is critical because it bodes well to the welder’s project. This is something other solutions don’t offer, which is the reason it is usually used to finish the project. Also, it is important to note, people who take advantage of this with wiring will often note a noticeable consistency in how good the wires conduct electricity.

It becomes an underrated advantage that needs to be taken into consideration when considering tinning in welding.

3. Resist Humidity

Melted tin is great on a metallic surface because it helps add a layer of protection.

The way this can be done has to do with humidity. Imagine a metallic surface that is certainly immediately in contact with humid conditions and starts having moisture content spread into the bottom layers. If the metal is fresh, this could end up creating the finishing to have ruined such as the item’s structural integrity.

With larger projects, this is a significant risk when it comes to the entire outcome. Consequently, professional welders make time to set the tinning process into motion to face up to humidity.

If the coverage is perfect, this is certainly more than enough to shield the bottom layers from the metal while ensuring the moisture content is repelled. In several wet conditions, this will give the metal plenty of time to age and strengthen.

4. Inexpensive

It is important to note plenty of welding projects are centered on reducing expenses. What this means is each element of the project will have an underlying cost connected with it.

The majority of these prices are base expenses that will include the iron, metal, and whatever else that is going to be involved in the welding process.

However, tinning provides ways to save a large amount of money.

The reason for this has to do with the alternatives around the open market. Other industrial solutions can be very expensive and will end up adding to the entire project expenses significantly. When you are seeking to save some amount of money, it makes sense to think about the value of tinning in welding.

It will save you 5-10% with the aid of something as simple as melted tin, which is never bad.

5. Seen to Work

It is usually necessary to realize you will find a history behind tinning in welding.

It has been useful for years and it also will continue to offer considerable value to individuals who wish a refined finish. When you are seeking to maximize the welding process, you will are aware of it is something as simple as this that is going to deliver great value.

Be it handling delicate metals and/or wiring, you will want to use tinning. It merely works and it also isn’t going to let you down regarding consistency. Other options are riskier and will depend on what you are actually getting and how you wind up utilizing it.

For several welders, this is a risky proposition and that is why it is best to gently use melted tin. It is going to prolong the lifestyle from the metal while ensuring the aesthetics are fantastic.

This kind of consistency is more than enough to showcase why tinning is critical for welders.

6. Increased Life Expectancy

Research has shown tinning does a good job of protecting the key layer.

In this way, you will visit a natural boost in the metal’s lifespan. This is ideal for larger welding projects that will get more odds of being in contact with inefficiencies from the top surface. If those inefficiencies are exposed, the full item can break apart.

This is the reason more and more welders look towards tinning because it naturally increases just how long the metal winds up lasting.

You can often visit a significant rise in the project’s age, which can immediately increase by 10-15%.

It is important to take this into account while considering alternatives that could work but are also gonna cost considerably.

7. Customized Finishing

The last advantage has to do with the finishing.

Welders are particular concerning the longevity of their project but that is just one thing along the way that needs to be included. You will also have to appreciate tinning in welding is great as it is fully personalized to provide great results.

This is key in making sure the finishing looks great and you may fully tailor it to how you will want it to appear.

By way of example, some welders want a shiny finish and it is possible to refine the tin to get it to appear in this way. However, others want a dull, matte finish, which is possible using tinning.

The flexibility is impossible to disregard and that is why tinning in welding is critical.

Wrapping Up

This is everything you need to understand about tinning in welding along with the main advantages that come along with this solution.

Welders which can be seeking to master their craft will often make time to comprehend the role of melted tin in solidifying their projects. Other solutions are not going to be approximately par and/or won’t be cost-effective.

By depending on tinning, it is possible to see great results and understand the metal may last for a long period after things are done.

The Best FullFlight System for Onewheel Pint

Like all our merchandise, we designed with patent-pending off-sensor know-how to provide a secure, snug experience. Try now, obtainable in multiple colors, to feel the increased management—while carving, standing, in motion, or performing methods. As far as the full flight system, I installed it, fins and all, and really ended up removing the fins however preserving the fender setup. I just like the convertible fashion of the fender, however I didn’t find the fins useful. For my most well-liked foot placement they actually made riding much less comfy. The Manta Ray is designed for use with the Onewheel Pint; this product just isn’t compatible with different Onewheel merchandise, together with the V1, Plus, or XR.

  • Designed specifically for the smaller form-factor Onewheel Pint, provides a complete front or again concave solution.
  • I could not go back to having that flat footpad now knowing how it feels with the concave.
  • Designed to be both sturdy and flexible for the most excessive riders.

I simply obtained my first onewheel XR a number of weeks back and put about 50 miles on it and love it! I used to personal an evolve electrical skateboard and the onewheel is simply on one other degree when it comes to really feel and fun. The revolutionary new electric boardsport that allows you to carve the planet earth in ways never thought potential.

Flightshield Pro

Lightweight, convertible, and practically roll-proof, the FlightFender sends it as exhausting as you do while www.flightfins.com/product/fullflight-system-for-onewheel-pint/#flightfender maintaining an aerodynamic aesthetic and quiet ride.

The Best FullFlight System for Onewheel Pint

I can’t touch upon the full flight system however I purchased a kush footpad at about a hundred miles and I love the upgrade. It feels lots easier to carve with it and much more comfortable to experience as properly. That method you’ll be able to throw the defend on should you need it and easily pull it off as nicely. The flight fins are attached far enough in in direction of the wheel that they do not really interfere with a wider extra pure stance. I would follow pulling your ft into them after which out as you journey. I continually modify my ft and use them when i must lock in, especially on trails and going over roots and rocks. I couldn’t go back to having that flat footpad now understanding the way it feels with the concave.

1 Flightfender

Better management, the ability to leap obstacles, and a new array of methods are yours with FlightFins! Designed to be each Onewheel Pint Upgrade Kit durable and flexible for probably the most extreme riders.

The Best FullFlight System for Onewheel Pint

Designed particularly for the smaller form-factor Onewheel Pint, offers an entire front or back concave resolution. A one-piece accent that FullFlight System for Onewheel Pint will remodel the way in which you experience! TIt provides a three-sided concave using experience, rising control and offering a wider platform for the rider’s foot.

Flightfin Extenders

The Best FullFlight System for Onewheel Pint

Like all our merchandise, we designed with patent-pending off-sensor know-how to provide a secure, snug experience. Try now, obtainable in multiple colors, to feel the increased management—while carving, standing, in motion, or performing methods. As far as the full flight system, I installed it, fins and all, and really ended up removing the fins however preserving the fender setup. I just like the convertible fashion of the fender, however I didn’t find the fins useful. For my most well-liked foot placement they actually made riding much less comfy. The Manta Ray is designed for use with the Onewheel Pint; this product just isn’t compatible with different Onewheel merchandise, together with the V1, Plus, or XR.

  • Designed specifically for the smaller form-factor Onewheel Pint, provides a complete front or again concave solution.
  • I could not go back to having that flat footpad now knowing how it feels with the concave.
  • Designed to be both sturdy and flexible for the most excessive riders.

I simply obtained my first onewheel XR a number of weeks back and put about 50 miles on it and love it! I used to personal an evolve electrical skateboard and the onewheel is simply on one other degree when it comes to really feel and fun. The revolutionary new electric boardsport that allows you to carve the planet earth in ways never thought potential.

Flightshield Pro

Lightweight, convertible, and practically roll-proof, the FlightFender sends it as exhausting as you do while www.flightfins.com/product/fullflight-system-for-onewheel-pint/#flightfender maintaining an aerodynamic aesthetic and quiet ride.

The Best FullFlight System for Onewheel Pint

I can’t touch upon the full flight system however I purchased a kush footpad at about a hundred miles and I love the upgrade. It feels lots easier to carve with it and much more comfortable to experience as properly. That method you’ll be able to throw the defend on should you need it and easily pull it off as nicely. The flight fins are attached far enough in in direction of the wheel that they do not really interfere with a wider extra pure stance. I would follow pulling your ft into them after which out as you journey. I continually modify my ft and use them when i must lock in, especially on trails and going over roots and rocks. I couldn’t go back to having that flat footpad now understanding the way it feels with the concave.

1 Flightfender

Better management, the ability to leap obstacles, and a new array of methods are yours with FlightFins! Designed to be each Onewheel Pint Upgrade Kit durable and flexible for probably the most extreme riders.

The Best FullFlight System for Onewheel Pint

Designed particularly for the smaller form-factor Onewheel Pint, offers an entire front or back concave resolution. A one-piece accent that FullFlight System for Onewheel Pint will remodel the way in which you experience! TIt provides a three-sided concave using experience, rising control and offering a wider platform for the rider’s foot.

Flightfin Extenders

HOW TRAGEDY WON THE LAKERS A CHAMPIONSHIP

Death is never a good thing, but sometimes it is the spark of something bigger, deeper, that goes beyond the tragedy itself. For the city of Los Angeles, the death of legend Kobe Bryant, was the fire lit under the city, set to boiling over, emotions and a passion that could only be cooled by victory and championship rings. His death went beyond sports, but it meant even more to the teams and professionals, especially those of a certain Los Angeles Lakers, where Bryant spent the entirety of his 20-year career, wearing five NBA championship rings before his time was over. Everyone in Los Angeles wanted to win, in life, in sports, in everything, but a Lakers’ championship ring would be the perfect hommage to Bryant, and with LeBron James leading the way, the Lakers did pay their dues.

 

The season for the Lakers is always turbocharged with high expectations. With legends like Magic, West, Kareem, Shaq, and Kobe, that have left their mark on the organisation and the NBA, winning has become part of the team’s DNA and culture. Bringing in the best player in the NBA (except for 2016 when Stephen Curry was a beast) in the last decade, LeBron James, after the retirement of Kobe Bryant, meant the Lakers were doing rebuilding in a different style and expected winning nonetheless. After an understandably sub-par first season in LA, James was expected to once again lead the Lakers to the height of NBA glory after he got Anthony Davis as his supporting cast. The season was going as planned, the Lakers looked a threat, the new look LA Clippers were front-runner and favorites so the Lakers had less pressure to deal with. In what had been a year of big losses for the NBA and American sports as a community after a number of high profile deaths, Kobe Bryant’s death would be the straw to break backs, and even hearts. Then the pandemic would strike, spiraling players and the whole world into an even darker place. For four months, death tolls, a change in lifestyle, fear, uncertainty, and grief would torment but also spark a new fire in the hearts of the Lakers’ organization and players. When the chance came to restart the NBA season in a bubble, amid all the concerns, LeBron James, would be most vocal about seizing the opportunity. Upon the restart in Orlando, the Lakers had a different aura about them, even the Los Angeles Dodgers, the baseball team had an air of inevitability about them, they all wanted to play and win for Kobe. As the ultimate competitor, Bryant would have wanted nothing more than that, and these teams were bent on paying respect to the man, by channeling his mamba mentality.

 

The Lakers would waste no effort and energy in the bubble, torching teams on their way to the Lakers’ first championship ring in over a decade, a first since Kobe Bryant last led the team to the winners circle in 2010. This is the story of how tragedy won the Lakers a championship ring.

View Lakers Championship Rings here 

HOW TRAGEDY WON THE LAKERS A CHAMPIONSHIP

Death is never a good thing, but sometimes it is the spark of something bigger, deeper, that goes beyond the tragedy itself. For the city of Los Angeles, the death of legend Kobe Bryant, was the fire lit under the city, set to boiling over, emotions and a passion that could only be cooled by victory and championship rings. His death went beyond sports, but it meant even more to the teams and professionals, especially those of a certain Los Angeles Lakers, where Bryant spent the entirety of his 20-year career, wearing five NBA championship rings before his time was over. Everyone in Los Angeles wanted to win, in life, in sports, in everything, but a Lakers’ championship ring would be the perfect hommage to Bryant, and with LeBron James leading the way, the Lakers did pay their dues.

 

The season for the Lakers is always turbocharged with high expectations. With legends like Magic, West, Kareem, Shaq, and Kobe, that have left their mark on the organisation and the NBA, winning has become part of the team’s DNA and culture. Bringing in the best player in the NBA (except for 2016 when Stephen Curry was a beast) in the last decade, LeBron James, after the retirement of Kobe Bryant, meant the Lakers were doing rebuilding in a different style and expected winning nonetheless. After an understandably sub-par first season in LA, James was expected to once again lead the Lakers to the height of NBA glory after he got Anthony Davis as his supporting cast. The season was going as planned, the Lakers looked a threat, the new look LA Clippers were front-runner and favorites so the Lakers had less pressure to deal with. In what had been a year of big losses for the NBA and American sports as a community after a number of high profile deaths, Kobe Bryant’s death would be the straw to break backs, and even hearts. Then the pandemic would strike, spiraling players and the whole world into an even darker place. For four months, death tolls, a change in lifestyle, fear, uncertainty, and grief would torment but also spark a new fire in the hearts of the Lakers’ organization and players. When the chance came to restart the NBA season in a bubble, amid all the concerns, LeBron James, would be most vocal about seizing the opportunity. Upon the restart in Orlando, the Lakers had a different aura about them, even the Los Angeles Dodgers, the baseball team had an air of inevitability about them, they all wanted to play and win for Kobe. As the ultimate competitor, Bryant would have wanted nothing more than that, and these teams were bent on paying respect to the man, by channeling his mamba mentality.

 

The Lakers would waste no effort and energy in the bubble, torching teams on their way to the Lakers’ first championship ring in over a decade, a first since Kobe Bryant last led the team to the winners circle in 2010. This is the story of how tragedy won the Lakers a championship ring.

View Lakers Championship Rings here 

New review of the best video camera lense

The Facts About The Best Lenses For Family Photography: A Guide – Helen … Revealed

With the user-friendly Zeiss anti-reflective finishing, you’ll be blown away by how clear the in-camera image is before you take it into any editing software application. This Sony portrait lens is pretty expensive and rather heavy, but you can successfully construct an entire portrait photography organization off the shots you’ll receive from this guywithout needing to purchase any other lenses.

8 ZA is a prime lens that lots of photographers declare is the very best Sony portrait lens, which, like the Sony 35mm f/1. 4 ZA, it can be your one-and-only. Why? It works magnificently across lots of kinds of portrait photography, including wedding event, travel, and occasion photography. It’s little, light, and perfect for the portrait professional photographer passing through miles upon miles, searching for interesting subjects and environments.

This makes it without a doubt the most flexible best nikon lenses for any Sony body. At this price, it would not make sense for a portrait professional photographer to not have this Sony portrait lens in their bag. We know that 85mm lenses provide a fantastic focal length for flattering portraits, but, with the the Sony 85mm f/1.

The Facts About The Best Lenses For Family Photography: A Guide – Helen … Revealed

The sharpness alone records deep, abundant colours, and the design of the lens is weather-sealed, plus dust- and moisture-resistant, so you can shoot portraits in a range of situations. The only downside to this lens is that it does not have image stabilization, so, unless your Sony body has integrated image stabilization, you’ll be stuck shooting with a slower shutter speed and at a greater ISO.

It also has an extremely complicated optical design, thanks to its newer, more state-of-the-art design. It’s quick, quiet, and has a ring-type ultrasonic autofocus system, putting it above its competition in lots of ways. As far as a 50mm portrait lens goes, it’s worth every penny. Sigma portrait lenses are normally cheaper than Nikon portrait lenses and Canon portrait lenses, yet they frequently provide even more spectacular outcomes.

4 Art is among these lenses, and far cheaper than the Nikon, Canon, and Sony variations. It’s more accurate, sharper, and just far superior than its competition in lots of ways. Like every other 35mm lens we’ve discussed, this is a lens that you can take anywhere, making it very flexible, and by far, among the very best lenses for portrait photography.

The Facts About The Best Lenses For Family Photography: A Guide – Helen … Revealed

It’s weather-sealed (dust- and splash-proof), and its ring-type autofocus system is unbelievably fast and quiet. But, like its 50mm portrait lens sibling, it does not have image stabilization. In spite of this, the images this portrait lens produces are extraordinary as its sharpness fills the whole of the frame. So, for a portrait professional photographer ISO something somewhat cheaper, it’s your best option.

8 DI VC USD for Canon and Nikon Tamron SP 85mm f/1. 8 DI VC USD for Canon and Nikon Sony FE 70-200mm f/2. 8G OSS Sony FE 50mm f/1. 8 Olympus Zuiko Digital 45mm f/1. 8 Olympus Zuiko 25mm f/1. 2 Fujifilm 56mm f/1. 2 R XF Fujifilm 35mm f1/4 Panasonic Lumix G 25mm f/1.

8 Power OIS There’s something about vintage video cameras and lenses that produce a sense of heat that contemporary innovation can’t provide. Modern portrait lenses are everything about speed, clarity, and, most importantly, developing that perfect image. But the very best vintage portrait lenses mark their own special imprint on an image.

The Facts About The Best Lenses For Family Photography: A Guide – Helen … Revealed

For the lenses above, you can generally quickly find adapters online, but the most typical installs are the Nikon (Al-Al-S), M42 Screw Mount, Adaptall, Pentax, and Canon FD/FL. Though there are various installs for different lenses, here are some general rules to remember when thinking of mounting vintage lenses on brand-new bodies.

You can generally mount best lenses for gh4 Lenses on Canon DSLRs, but not always. A M42 lens can be installed on nearly any camera. When it comes to Sony, Panasonic (or any micro four-thirds or mirrorless) video cameras, many lens are mountable. Canon lenses can not be installed on Nikon DLSRs. With all that in mind, here’s an excellent list of some of the very best manual-focus portrait lenses that will enliven your portraiture.

4 aperture, strong construct, and a flexible focal length, this monster is among the very best lenses for portrait photography ever constructed. With the power of a Sony A7 body, this lens will perform brilliantly in low-light situations. This is a premium best nikon lenses for videography from the 70s and 80s and is still commonly utilized today by both digital and movie portrait photographers.

The Facts About The Best Lenses For Family Photography: A Guide – Helen … Revealed

This portrait lens is very quick, and provides a short tele-lens for close-ups of your subjects. The lens is perfect when combined with Minolta MAXXUM video cameras, but the appeal of it is, is that it’ll do marvels on your Sony Alpha camera body. With the Sony A99, it’s even got image stabilization and quick autofocus! Still among the very best third-party lens developers, Tamron has a strong custom in crafting great lenses.

5 macro can be utilized with an Adaptall Mount, which indicates it deals with a best lens for photography, Canon, or Pentax, making it rather the transferable lens. As a macro lens, it gives portrait photographers a broader aperture, close angle abilities and sharp optics. Certainly a distinct viewpoint for a portrait. While it looks like a Soviet piece of equipment from a bygone period (it was in fact originally a Russian remake of a Leica lens), the Helios 85mm f/1.

While the subject leaps out at the viewer, the background merges what looks like beautiful, blurred brush strokes, providing this lens its special and unmatchable style. When searching for good portrait lenses in the vintage section, here are some pointers that might help you find the best fit: Never low-cost out on an adapter.

CPAP cleaning devices – Sleep8 CPAP Cleaner

I’d like to introduce to you the Sleep8 CPAP Cleaner.

What is a Sleep8 CPAP Cleaner?

This device completely sanitizes your mask,headgear,tubing and water chamber by getting rid of 99.9 percent of mold,bacteria and viruses viruses (according to: https://medium.com/@tom.o/sleep8-cpap-cleaner-reviewed-aa5c880d6d11

The Sleep8 makes use of activated oxygen or ozone instead of water to clean and sanitize your CPAP equipment. You will appreciate to know that ozone doesn’t come into contact with your CPAP machine in any way. And also,what makes Sleep8 stand out from its competitors is its size. It is very lightweight,weighing only 9.4 ounces. And it’s portable,so you can pack it in your luggage for use at home or when you travel.

Let’s take a look inside the box. On top is the Sleep8 itself. You’ll also see the micro USB charger,the Sleep8 Quick Start Guide,and the Sleep8 filter bag. The soft,resealable filter bag should be changed approximately every 3 months with regular cleaning use. Replacement filter bags are available at reputable CPAP and medical equipment stores.

Sleep 8 CPAP Cleaner instructions

As an optional purchase,the makers of Sleep8 have made this convenient soft shell travel case which easily stores all your sleep aid accessories at home or on the go.

To start the process,simply connect the micro USB cable between the Sleep8 device and an accessible and working electrical outlet. When plugged in,your Sleep8 will beep once and the battery indicator will be seen on the screen. You can either use the Sleep8 while plugged in or on battery power. A full charge will take about 90 minutes or so.

How does the cleaning procedure work? Before you begin the sanitizing process,make sure you clean up your CPAP mask with a wipe to remove residue or facial oils from the cushion. If you’re using a dehumidifier and you are sanitizing the water chamber,be sure the water chamber is complete empty. Don’t leave any excess water in it.

Leaving your mask attached to the tube,connect this tube to the valve inside the filter bag. The Sleep8 is compatible with most CPAP tubing with no special connections or parts needed. Only the Dream Station Go with 12 millimeter tubing which is smaller than standard CPAP tubing,requires a mask adaptor to connect the tube to the filter bag. This mask adaptor can be also purchased from your trusted CPAP or medical equipment store.

Once you place the mask,tube and water chamber inside the bag,seal it shut. On the outside of the bag,you’ll notice a triangular port which attaches directly to the Sleep8 CPAP Cleaner.

With the device attached,and the bag sealed,press the round power button on the Sleep8 until you hear a beep. The device will light up and the device timer will begin the countdown,starting the sanitation process.

The device is virtually quiet. But you will hear the fan adjust speed from time to time or see the filter bag inflate,but this process is perfectly normal during sanitation.

In about an hour,the Sleep8 device will beep,and the screen will say ok,and the device will shut off.

When the device shuts off,you can open the bag and remove your CPAP equipment. The Sleep8 CPAP Cleaner comes with a safety start feature which means the device the device won’t run unless it’s connected to the bag properly,An alarm on the device will beep for 30 seconds and an X will appear on the screen. To cancel this alarm,you simply have to press the power button

The Sleep8 CPAP Cleaner also comes with 2 other built in alarms to let you know if something is wrong with the device. This includes a fan failure alarm and a low battery alarm. If you experience a fan failure alarm,please contact Sleep8 support for the proper procedures.

The Sleep 8 CPAP Cleaner Results

If you’re going to need a fast,efficient,lightweight and portable CPAP Cleaner,then the Sleep8 is for you. If you have any inquiries,feel free to contact or email the Sleep8 customer care support team. The Sleep8 CPAP Cleaner and its accessories can also be purchased at your favorite CPAP or medical equipment store. And remember,the resealable filter bag should be replaced every 3 months with regular use for hygiene purposes. For further reading,check out this article on Medium.com

https://medium.com/@tom.o/sleep8-cpap-cleaner-reviewed-aa5c880d6d11https://medium.com/@tom.o/sleep8-cpap-cleaner-reviewed-aa5c880d6d11